Concrete Spacers

Expansion joint for concrete.

Prevent dirt from entering the joints and makes perfecty insulated concrete plots to dilate without cracking. They are manufactured in different sizes and colors.

Special in-situ forged.
Changing positions allows the separation of floor coating 10 15 20 and 25 mm in diameter in one piece.

Universal separator particularly suitable for use with welding network. It works the same way as the separator tower. Less stable but much faster. It allows better range of thicknesses in the iron.

Universal plastic separator for concretr specially indicated for networks electro-welded, preventing the iron from touching the ground and being completely covered.

Like the separator FORJADO IN-SITU, it has a capacity of up to 3 forger irons simultaneously. Very quick to install and very easy to correct his location. 

Separator of horizontal use, which ensures stability and optimal load distribution and welded mesh suitable for light armor.

Horizontal separator of 25 mm. Equipped with flat supporting surface taht is used for wrought armed in-situ (on site), replaces commonly called iron planes.

Very strong horizontal separator that ensures stability. It is easy to add to the concrete. Especially suitable for networks with heavy armor and welded.

Pipe of internal diameter of 22 mm. Used for formwork.

Separator of horizontal use, which ensures high stability and resistance to compression. Turning it over, it can be used in insulation panels.

Length 2000 mm. Or cut to size as needed.

Separator of horizontal and vertical use of 35 mm. For heavy armor. Ensures that the separator is not apparent from the armature and provides guidance for mold.

Is used to close holes in rigid tubes and flaps, ideal complement to the formwork tube. The same color as the concrete, allows to hide the tubes.

Separator of horizontal use, which ensure high stability and optimal load distribution indicated for welded network and light armor.

Separator of horizontal use, which ensure high stability and optimal load distribution indicated for welded network and light armor.

Protect the network, the wires, everything that we do not want to mess with the concrete. Thanks to its longitudinal groove, the sheath can be plasced after installing the network.

Prevents prefabricated panels from scratching during transport, allowing to pile up panels after the painting process, preventing it from deteriorating paint.

Designed for leveling and wedging walls, columns,. Great resistance to compression. With relief to prevent the plates from moving.

Plastic wedges used for leveling of precast etc. They have a high resistance to pressure and they are embossed to prevent movement of precast concrete panels. Used also for any other jobs.